manufacturer’s instructions for fitting the CB2000, CB3000, Curve & CB6000
Below are the manufacturers recommended fitting instructions for the CB-2000, CB-3000, The Curve and the CB-6000.
This article is not written by Tickleberry, and is the manufacturer’s recommendations for the fit and care of their Chastity Devices. We recommend that all our customers purchasing one of these chastity devices makes themselves familiar with this page.
“Lubricate the head and shaft of penis with a silicon based gel or lotion prior to wearing any of the devices. Do yourself a favor and always put the product on while in a ‘Relaxed State’.
RINGS: When wearing the CB-2000 rings, pull a little skin through the ring and then insert one ball at a time. Push the penis through the ring. When wearing the CB-3000 and Curve rings, open the bottom swivel and put them around the ball sack and penis. The CB-3000 and Curve rings are interchangeable. When wearing the CB-6000 ring, take the bottom portion of the ring and put it around the ball sack and penis. Insert the top ring with the guide pins. While putting on the other top half make sure to push the penis in a down position while attaching these two pieces. The CB-6000 parts are not interchangeable with other products.
LOCKING PINS: Insert the locking pin in the recessed side of the rings.
SPACERS: Various sized spacers are provided with the CB-2000, CB-3000 and Curve so you can find the most comfortable fit. The small spacer goes behind the lock and in front of the ring. The spacers with CB-6000 are designed in such a way that each spacer fits a particular locking pin.
CAGE: Insert the penis into the cage. Push the penis down in order to avoid pinching when connecting the cage to the ring.
POINTS OF INTRIGUE: The CB-2000, CB-3000 and Curve Points of Intrigue come in three different lengths. The points for the CB-3000 and Curve are interchangeable. The long edge goes towards the ring. They fit on the locking pin between the cage and ring.
BRASS PADLOCK: After assembling the ring, guide pins, locking pin and spacers to the cage, attach the brass padlock. The CB-6000 only comes with one key. Make sure to have a diligent Keyholder!
CLEANING PRODUCT: Use a mild soap and soft type brush (toothbrush) for cleaning. Do Not use household cleaning products.
NOTE: Always take the time to smooth any loose skin around the rings and cage for the most comfortable fit.”