Thick Neoprene Cock Rings 50mm

Can you have too many cock rings? We don't think so! These thick neoprene cock rings are probably some of the most comfortable rings you'll ever wear. They are light in weight and can be worn under everyday clothing for hours at a time, of course they fantastic for masturbation and will help maintain an erection during love making.

We currently have just the 50mm size in stock.

Our neoprene cock rings are nice and wide, similar in style to a "donut cock ring" and so will hold your testicles up and away from the body, presenting them in a forward attention seeking position, giving the whole genital area a larger appearance.

These rings are usually available in 4 sizes and can be worn as traditional cock rings (around your cock and balls), shaft rings and even around your balls.

If you're allergic to latex or rubber, don't like to wear metal cock rings, then Neoprene could be the solution. Neoprene is strong, warms to body temperature, is stretchy, latex free, phthalate free and is the material used for divers' wet suits.

Sizes usually available - Internal Diameter:
32mm (1.25 inches) can be worn as ball stretchers or on the shaft of your penis
38mm (1.5 inches) can be worn as ball stretchers, or as a traditional cock ring if you are smaller than average.
45mm (1.75 inches) a regular size for a cock ring
50mm (2 inches) a regular option for a cock ring.

Also see our Nut Stretching Combo Pack, an ideal introduction to ball stretching, the Combo Pack contains two 32mm rings which cost a little less than purchasing two of these 32mm rings "a la carte" from this page.

Note about Lubricants: If you like to use a lubricant with your neoprene products it's always best to opt for any water based lube. Do not use oil or fat based products such as Baby Oil, Crisco, Olive oil, etc as these will, over time, cause the material to deteriorate.

• Material: Neoprene
  Colour: Black
  Sizes Available - Internal Diameter
  32mm (1.25 inches) can be worn as ball stretchers or on the shaft of your penis
  38mm (1.5 inches) can be worn as ball stretchers if you have big balls or a lot of skin, or can be used as a traditional cock ring if you are smaller than average
  45mm (1.75 inches) a regular size for a cock ring
  50mm (2 inches) a regular option for a cock ring.
  
  
  
  
  Putting on a Cock Ring
  Neoprene rings have some stretch to them and so are easier to wear, put on and take off than those made of metal. Cock rings can be a little tricky to put on at first, but with a little practice it soon becomes quite easy. Always remember to put them on, and take them off, when your penis is flaccid and soft.
  
  • Pull a little scrotal skin through the ring, then push one testicle through.
  • Take a little more skin and push the other testicle through the ring.
  • Now bend the penis downwards and pull it through the ring.
  
  
  
  
  Measuring for a Cock Ring - A Guide:
  Cock Rings are always sized by their internal diameter, so you will need to measure yourself for this. Measuring for a ring is quite straightforward
  
  First you need to measure the circumference around your cock from behind the balls. You can use a fabric tape measure (the kind dressmakers use) to get the measurement, or, if you don't have one, you can use a piece of string and a ruler.
  
  Wrap the tape measure or string around your cock, going behind the balls. The tape should be snug but not tight. The last thing you want is to suffer from circulation problems, so a good time to take this measurement is after a shower or bath when your body is most likely at it's warmest.
  
  Now you have your circumference you need to divide it by 3.14 to get the diameter. We've done some sample calculations below to show you how it works:
  
  First in metric:
  17.3 cm ÷ 3.14 = 55mm diameter
  15.7 cm ÷ 3.14 = 50mm diameter
  14.1 cm ÷ 3.14 = 45mm diameter
  12.5 cm ÷ 3.14 = 40mm diameter
  
  And in imperial:
  7 inches ÷ 3.14 = 2.25 inches diameter
  6.25 inches ÷ 3.14 = 2 inches diameter
  5.5 inches ÷ 3.14 = 1.75 inches diameter
  4.7 inches ÷ 3.14 = 1.5 inches diameter
  
  It's worth taking the measurement two or three times to be absolutely sure.

There are no reviews at present.
Want to be the first to offer a review? Click here